Bloomfield 8781A - Manual (Page 20)

SERVICING INSTRUCTIONS (continued)
18
REPAIR HOT WATER FAUCET
Remove top panel and turn faucet valve OFF.
Unscrew aerator cap from faucet and remove handle retaining clip.
Do not let faucet body turn.
Pull bonnet assembly from faucet body.
Examine the interior of the faucet body and the surface of the seat
cup. Clean out any debris in the faucet body, using a stiff bristle
brush if necessary.
Examine the aerator. Clean any debris from the screen or flow
straightener, using a stiff bristle brush if necessary.
Reassemble in reverse order.
REPLACE CONTROL PANEL LIGHT or SWITCH
Unplug power cord or turn circuit breaker OFF.
Using Switch Removal Tool (p/n 83209) to remove TEA VOLUME
SELECT, BREW SWITCH or STOP BREW switch. Use a thin
screwdriver to pry light or COFFEE/TEA switch from mounting
hole. Disconnect leads.
Reassemble in reverse order.
NOTE: Any abrasion or
roughness on the flat end of the
seat cup will require replacing
the seat cup:
Work the seat cup out of the
bonnet and off of the end of the
stem.
Install a new seat cup, making
sure the knob on the stem is
fully inserted into the pocket of
the seat cup, and the skirt of the
seat cup is fully inserted into the
bonnet.
SEAT CUP
Fig. 15 Faucet Repair
M62
8
76
201
Ow
ner
s M
a
n
u
a
l 87
81
A Tea
B
re
w
e
r