EZWatch Multi View EZ Watch Pro 5.0 - Manual (Page 8)

GeoVision Technical Handbook 53
4.4.2 Single Host
Through Single Host, Multiview provides the ability to save DVR’s IP address, user name, and password
in an address book to allow streaming video from multiple DVRs.
1. In Multiview, click on “Edit Host” button as shown above.
2. Click “New” button then select “Group” to create a new group.
3. After a group is created, click “New” button then select “Host” to create a new host.
4. Name the DVR in “Host Name” for
identification.
5. Enter IP Address, User Name, Password, as
well as Ports used for DVR.
6. Click on “Save”.
7. Repeat steps 1 to 6 to add multiple DVRs into
host list.
8. Click on “OK”.
 For detailed instruction, refer to p.399 of v8.4
User Manual