Feiss MR1042 Mirror - Manual

(E) 09/02
A
SSEMBLY
I
NSTRUCTI ONS
F
OR
MR1042
M U R R A Y F E I S S
©FEI SS I NDUST RI ES
BACK VIEW:
IMPORTANT:
TURN OFF POWER AT MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
beginning assembly.
1. Lay frame, with key hole plate facing up, on a
non-abrasive and elevated surface.
2. Lay mirror face down on top of frame.
Make certain glass mirror is centered within frame.
3. Secure mirror to frame with 7 tabs and 14 screws as
shown in drawing.
4. At desired wall location, install two picture frame
hangers or screws (not included) into wall at
corresponding position with mounting slots on
back of mirror frame.
NOTE: Use a level to insure mounting position is
horizontal. Check certain the picture hangers or screws
are securely fastened onto wall to adequetely support
the weight of the mirror. If not certain, consult a
qualified technician.
5. Carefully hang mirror frame onto wall.
BACK VIEW:
Tabs (7 Pieces)
Screws (14 Pieces)
Glass Mirror
Frame
Key Hole Plate