Blaupunkt LOS ANGELES MP71 - Manual (Page 26)

26
➮
Adjust the minutes with the / button
7
.
➮
Press the OK button
5
or the MENU
button
8
to leave the menu. The set-
tings are then saved.
Selecting 12/24-hour clock mode
➮
Press the MENU button
8
.
➮
Press the or button
7
as often as
is necessary for “24 H MODE” or “12 H
MODE” to appear in the display.
➮
Press the or buttons
7
to switch
between the modes.
➮
Press the OK button
5
or the MENU
button
8
to leave the menu. The set-
tings are then saved.
Having the time displayed
constantly when the device is
switched off
➮
If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button
8
.
➮
Press the or button
7
as often as
is necessary for “CLK OFF” or “CLK
ON” to appear in the display.
➮
Press the or button
7
to switch
between the display being ON or OFF.
➮
Press the OK button
5
or the MENU
button
8
to leave the menu. The set-
tings are then saved.
Equalizer
This device has a parametric digital equaliz-
er. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8 dB).
The following filters are available:
●
LOW EQ 32 - 200 Hz
●
MID EQ 250 - 1,600 Hz
●
HIGH EQ 2,000 - 12,500 Hz
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.
Adjustment instructions
When setting the equalizer, we recommend
you use a CD, cassette or MiniDisc (depend-
ing on your car radio) which you are familiar
with.
Before making any adjustments to the equal-
izer zero the tone settings and deactivate the
loudness. For more information, read the sec-
tion on “Tone and volume”.
➮
Listen to a CD, tape cassette or Mini-
Disc (according to how the radio is
equipped).
➮
Compare the sound you hear with how
you feel it should be.
➮
Now consult the “Equalizer adjustment
guide” table for “Tone impression”.
➮
Adjust the equalizer values as de-
scribed under “Action”.
Switching the equalizer on and
off
➮
To switch off the equalizer, press the
DEQ button
6
.
“LOW EQ” is shown on the display.
EQUALIZER TIME