Bush Hog FC-BL-0002 - Manual (Page 29)

ASSEMBLY
100 Series 08/10 Assembly Section 3-5
© 2010 Alamo Group Inc.
ASSEMBL
Y
Gauge Wheel (Extra Equipment)
Mounting Holes must be drilled, for mounting the
Gauge Wheel to the Mainframe (See Planner
Wheel illustration in Maintenance Section 5-2.) Dual
or Single Wheels with laminated puncture proof or
pneumatic tires are optional. Assembly of the
Hydraulic Cylinder to the Gauge Wheel Beam must
be in the direction as shown in Figure Asm-0005. It
is also important to route the hydraulic Hose
through the Hose Retainers designed for this
equipment.
Skid Shoes & Quick Tack End Plates (Extra Equipment)
Skid Shoes prevent gouging and scalping and
increase Blade life. End Plates help move larger
quantities of bulk material. Install as shown in
Figure Asm-0022.