Flex FB LOW Rise Adhesive - Manual (Page 2)

_____________________________________________________________________________________________________
Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533
Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com
Page 2
APPROVED SUBSTRATES
Structural Concrete, Plywood and OSB Decking, Cementitious Wood Fiber, Gypsum, LWIC (cellular or
air entrained lightweight concrete), existing Asphalt and Modified Bitumen (smooth surface or mineral
surface), SBS base sheets, polyisocyanurate insulation board, HDWF cover board, DensDeck cover
board, Securock cover board.
NON-APPROVED SUBSTRATES
Coal Tar Pitch BUR, Expanded or Extruded Polystyrene Foam insulation board, Fiberglass insulation
board, and Perlite insulation board.
PACKAGING
Boxes:
Part 1- 5 gal bag in the box and Part 2 – 5 gal bag in the box. Specifically designed to be dispensed using
the PaceCart 2 ™dispenser. The Pace Cart 2 ™dispenser pumps the Flex FB Low Rise Adhesive parts 1
and 2 simultaneously to a static mixer which allows a properly mixed bead of adhesive to be applied to
the receiving substrate.
Cartridge:
1500 ml cartridge kit (750 ml part 1 and 750 ml part 2). Cartridges can be dispensed using various Flex
approved hand or multi-bead electric dispensing units. The dispensing units extrude Part 1 and Part 2
simultaneously through a static mixer which allows a properly mixed bead of adhesive to be applied to the
receiving substrate.
Note: PaceCart 2 ™ is a registered trademark of OMG, Inc.
CAUTIONS
· Flex FB Low Rise Adhesive may be installed only when ambient conditions, and bonding
substrates and membranes, exceed 40°F, (4° C) and are rising.
· Store in original and unopened containers at temperatures between 60°F (15.6°C) and 80°F
(26.7°C) prior to use.
· Do not store in direct sunlight.
· Do not allow to freeze.
· Do not expose to moisture.
· Ship and store product with handle side up and keep caps of nozzle closed tightly.
WARNING
Review applicable MSDS sheet prior to use. Personnel that are sensitive/allergic to isocyanate or
polyurethane should not work with Flex FB Low Rise Adhesive. Avoid contact with eyes. Avoid
breathing vapors. Avoid contact with skin. Use caution when removing caps from cartons. Do not burn
empty containers. Dispose of in accordance with local, federal, and state regulations. For use with Flex
Fleeceback Roof Membranes only.