Flex TPO Primer - Manual (Page 2)

___________________________________________________________________________________________________
Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533
Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com
Page 2
2. Wash thoroughly after handling. Avoid contact with eyes, skin and clothing. Use of solvent
resistant gloves and safety glasses recommended. Keep away from heat, sparks, motors and open
flame. DO NOT SMOKE WHILE USING. Keep lid closed when not in use.
3. If swallowed, DO NOT INDUCE VOMITING. Call physician immediately. In case of eye
contact, flush with water for at least 15 minutes. In case of skin contact, wash with soap and
water. If irritation develops, call physician.
4. In case of fire handle as a solvent or gasoline fire. Use dry chemical, carbon dioxide or foam fire
extinguishers. Water fog or spray may be used to smother the fire and cool containers. Do not use
a solid stream of water to fight fire because it can scatter and spread the fire.
5. Thoroughly stir this product until all settled pigment is blended into the solution. Solids
suspended in TPO Primer tend to settle; stir or agitate the solution frequently during use.
6. Use TPO Primer full strength. Do not thin. Thinning will affect performance.
7. Job site storage temperatures excess of 90°F (32°C) may affect product shelf life. Should the
primer be stored at temperatures lower than 60°F (15°C), restore to room temperature prior to use.
8. REVIEW THE TPO PRIMER MATERIAL SAFETY DATA SHEET FOR COMPLETE
SAFETY INFORMATION PRIOR TO USE.
9 KEEP OUT OF THE REACH OF CHILDREN.
*General properties. Typical properties and characteristics are based on samples tested and are not
guaranteed for all samples of this product.
** REVIEW CURRENT FLEX SPECIFICATIONS AND DETAILS FOR SPECIFIC
APPLICATION REQUIREMENTS.