General Machine Products 71637 Traveling Ground Kit - Manual (Page 4)

Page 4 of 8 General Machine Products Co., Inc.
The roller must be connected to a suitable ground by means of
one of the 1/0 jumper cables provided in order to minimize the volt-
age on the conductors mentioned above in the event of an acci-
dental contact with an energized power conductor.
A satisfactory power company vertical neutral of a multi-
grounded neutral (MGN) system ground or existing grounded
communication plant that
is bonded to a central
office ground or under-
ground metallic piping
system must be present
to properly use ground-
ing kit when placing
strand under the follow-
ing conditions:
a) On joint use pole
lines
b) When crossing any
electric power conduc-
tors
c) At any location where
there is a possibility of
accidental contacting
power conductors
Vertical neutral of a multi-grounded
neutral system