Hawke Optics Digital 5x - Manual (Page 10)

17 18
monitor connection
• Connect your monitor to the Video OUT on the
monocular using the video lead supplied.
• Hold the “power” button for 3 seconds, the monitor
will now display the screen of the monocular.
computer connection
• Connect the monocular to your computer using the
USB lead supplied.
• The computer will identify the monocular
automatically and read the content on the SD card.
• The battery will be charged while the monocular is
connected to the computer.
auto power off
• After 3 minutes of no operation the monocular will
turn off (except in video or playback mode).
date and time
• Connect the monocular to your computer using the
USB lead supplied.
• The computer will identify the monocular
automatically and read the content on the SD card.
• Locate and open the “time.txt” file.
• Adjust the date and time in the following format:
yyyy.mm.dd hh.mm.ss
• Save and close the “time.txt” file.
• Copy the “time.txt” file and paste it into the root
directory (the top-most folder)
• Eject the monocular and disconnect the USB lead.
• The correct date and time are now set.
• The date and time settings will reset if the battery is
fully discharged or removed from the monocular for
long periods of time.