HMC Electronics 04007 Hardman Double Bubble Epoxy, Orange/White Packet, High Peel Strength Adhesive User Manual
Hardman® high-peel-strength epoxy
Royal Adhesives and Sealants, LLC
600 Cortlandt Street
Belleville, NJ 07109 USA
Tel: (888) 442-7362
Tel: (973) 751-3000
Fax: (973) 751-8407
Web: www.royaladhesives.com
ISO 9001:2000
T
T
E
E
C
C
H
H
N
N
I
I
C
C
A
A
L
L
I
I
N
N
F
F
O
O
R
R
M
M
A
A
T
T
I
I
O
O
N
N
HARDMAN® High-Peel-Strength Epoxy
DOUBLE/BUBBLE® Orange Package #04007
PRODUCT DESCRIPTION
HARDMAN High-Peel-Strength Epoxy is a semi–rigid, two–
component structural epoxy adhesive. It develops an
excellent combination of shear strength and peel strength
with only a room temperature cure. It has excellent shock
resistance, vibration resistance and impact strength.
HARDMAN High-Peel-Strength Epoxy is recommended for the
following substrates:
Metal
Plastic
Other
Carbon Steel
PVC
Rubber
Stainless Steel
Polystyrene
Stone
Aluminum Nylon
Wood
Copper/Brass
Glass
Tin
China
Zinc
Leather
TYPICAL USES
HARDMAN High-Peel-Strength Epoxy can be used to repair
sports equipment, marine, aircraft, auto, truck and tractor
parts. It is an excellent adhesive for grinding wheel hubs,
industrial parts, and door and window gaskets.
PACKAGING
The DOUBLE/BUBBLE package is a handy, dual-pouch, one-
shot, job-size packaging concept. It reduces the waste
typically associated with the use of larger quantities of two-
component adhesives. This unique packaging ensures that
DOUBLE/BUBBLE adhesives are always factory fresh and
accurately portioned for optimum adhesive performance.
HARDMAN High-Peel-Strength Epoxy is also available in poly
bottles, 1-gallon cans, 5-gallon pails and 55- gallon drums.
HOW TO USE
Surface must be clean and dry before application. Remove all
chemicals, dirt, wax and oil.
FOLD
SNIP
SQUEEZE
MIX/APPLY
Fold the DOUBLE/BUBBLE package along the center seal, snip
the end, squeeze out the contents, mix thoroughly and apply.
TYPICAL UNCURED PROPERTIES
Part A
Part B
Mixed
Color Beige
Gray
Gray
Viscosity @ 25 °C, cps.
60,000
50,000
50,000
Weight per Gallon, lbs.
11.3
10.2
10.6
Specific Gravity @ 25 °C
1.35
1.22
1.27
Work time, hours
– – –
– – –
3
Handling strength, hours
– – –
– – –
18
Shelf Life, months
24
24
– – –
TYPICAL CURED PHYSICAL PROPERTIES
(Tested at 25 °C unless otherwise indicated)
Test
Result
Hardness, Shore D
65
Maximum Service Temp.
121 °C (250 °F)
Lap Shear Strength
(acid-etched aluminum to aluminum/various cure schedules)
Cure Schedule
18 hrs. @ 25 °C +
2 hrs. @ 100 °C
30 min.
@ 121 °C
1 hr.
@ 82 °C
2 hrs.
@ 66 °C
Shear Strength, psi
2,940
2,610
2,940
3,150
Lap Shear Strength
(acid-etched aluminum to aluminum/cure schedule 7 days @ 25 °C)
Test Temperature
–55 °C
–40 °C
25 °C
82 °C
149 °C
Shear Strength, psi
3,320
3,206
2,800
970
237
T-Peel Strength
(acid-etched aluminum to aluminum/cure schedule 7 days @ 25 °C)
Test Temperature
–40 °C
25 °C
82 °C
Peel Strength, pli
3.8
24
2
Lap Shear Strength
(acid-etched aluminum to aluminum/cure schedule 7 days @ 25 °C)
After exposure to various environments.
Shear Strength, psi
1. Tap water immersion at 25 °C for 30 days.
1,220
2. Antifreeze immersion at 25 °C for 7 days.
1,730
3. JP – 4 Aviation Fuel immersion at 25°C
for 7 days.
1,730
4. Dry heat aging at 149 °C for 30 days.
3,400
DS-DB_04007-10/02-Rv.D
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440