HMC Electronics ES1629 Chemtronics Cleaner Lubricant, Kontact Restorer User Manual
Technical data sheet kontact restorer, New & improved, Chemtronics
PRODUCT DESCRIPTION
Kontact Restorer
®
New & Improved!
Cleaner Lubricant is specially engineered to
clean, lubricate and protect connectors in one
easy step. This nonflammable
cleaner/lubricant will clean contact surfaces
and provide a long-lasting protective film
that protects the contact from corrosion.
Same great features as original,
without
HCFC-141b
Nonflammable
Deep penetrating aerosol spray
Minimizes friction and metal wear
Protects metal contacts from carbon
build-up
May be used on energized equipment
Cleans and lubricates hard to reach areas
TYPICAL APPLICATIONS
Kontact Restorer
®
New & Improved!
Cleaner Lubricant effectively cleans:
Circuit Breakers
Contact Breaker Points
Distribution Panels
Intersurface Connectors
Motors and Generators
Plugs and Sockets
Potentiometers
Relay Contacts
Solenoids
Switching Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
156
° F (Initial)
Evaporation Rate
(butyl acetate=1)
>1
Flash Point (TCC)
None
Specific Gravity
1.35
Vapor Pressure @68
°F 112 mmHg
Appearance Clear, colorless liquid
Odor
Mild
Solubility in Water
Negligible
Dielectric Breakdown
(ASTM D-877)
23.5 kV
Kauri-Butanol
(KB) Number
125
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
New & Improved Kontact Restorer
®
is generally
compatible with most materials used in electrical
and electronic assemblies, except acrylics, ABS
resins, polycarbonates and polystyrenes. With
any chemical solvent/component compatibility
must be determined on a non-critical area prior
to use.
TDS # 1629
CHEMTRONICS
®
Technical Data Sheet
Kontact Restorer
®
New & Improved!
Cleaner Lubricant
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440