HMC Electronics ES1612 Chemtronics Contact Cleaner, Pow-R-Wash NX User Manual

Chemtronics, Tds # 1612

Advertising
background image

CHEMTRONICS

®

Technical Data Sheet

Pow-R-Wash

NX Contact Cleaner


PRODUCT DESCRIPTION

The Pow-R-Wash

NX formulation is a

nonflammable electronics contact cleaner
that quickly removes soils, oxides, and other
contaminates from metal electrical contacts.
This high pressure solvent system is
engineered to restore and improve electrical
continuity on all types of contacts,
connectors, and switches.
ƒ Same great features as original

formulation but without HCFC-141b

ƒ Removes encrusted oxides, dirt, grease

and other contaminants

ƒ Penetrates to clean hard to reach areas
ƒ Evaporates quickly
ƒ Nonflammable
ƒ Leaves no residues
ƒ Noncorrosive; safe for sensitive metals
ƒ Available with All-Way Spray valve
ƒ U.S. Patent 6,746,998

TYPICAL APPLICATIONS
Pow-R-Wash

NX contact cleaner cleans

and deoxidizes:

ƒ Circuit Breakers
ƒ Monitors and Generators
ƒ Plugs and Sockets
ƒ Potentiometers
ƒ Printed Circuit Boards
ƒ Relay and Contacts
ƒ Selector Switches
ƒ Solenoids
ƒ Switching Devices





TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES

TDS # 1612


Boiling Point

>99

°F Initial

Evaporation Rate (butyl acetate=1) >1

Flash Point (TCC) None

Specific Gravity 1.28

Vapor Pressure @68

°F 183 mmHg

Solubility in Water Negligible

Dielectric Breakdown
(ASTM D-877)

30 kV

VOC* Content: Aerosol

CARB 75%

SCAQMD 830 g/L
Federal 42%

RoHS Compliant

Shelflife 5 years

*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).


COMPATIBILITY
Pow-R-Wash

NX formulation is generally

compatible with most materials used printed
circuit board fabrication except acrylics,
ABS resins, polycarbonates and
polystyrenes. As with any cleaning agent,
solvent/component compatibility must be
determined on a non-critical area prior to
use.

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

(800) 482-4440

Advertising