HMC Electronics MDL Series BK Precision DC Electronic Load System Module User Manual
Page 68
68
0 ≤ Tpf ≤ (Ton+ T off)
Tpf is test delay time
21.
Repeat steps 17 through 20 and set the rest of the steps’ load
on/off time.
22.
Set condition for when to stop testing. COMPLETE means to stop
test when all steps are completed. FAILURE means to stop test
when testing fails. Press keys to select condition and press
Enter to confirm.
Stop Condition
Complete
Failure
23.
Program chain is used when you need to link to the next file to
be tested. For example, if you need to link to group 2, press 2. If
you do not need to link to another file, input ⓪ and then press
Enter key to confirm.
Program Chain
NO: 2
24.
Save the edited files into the EEPROM. Up to 10 program files
can be saved. For instance, press 1 to save the edited file to
program file 1 and then press Enter to confirm.
Save Program
NO: 1
25.
Press Esc key to exit menu.
Run Program
Recall Prog
Edit Program
Exit
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440