Humanscale ParaFlex - Manual

PARA/FLEX INSTALLATION HARDWARE
MOUNTING OPTIONS
Beam Mount
Slatwall Mount
Desk Mount
Beam Mount
2 Thumbscrews
3 Desk Mount Screws
Additional hardware required: Electric drill with ½” drill bit
Desk Mount
Desk Mount Bolt
Beam Mount Bolt
Slatwall Mount
Slatwall Mount Bolt
4 Thumbscrews
FRICTION ADJUSTMENTS
EXPANDING/COLLAPSING CROSSBAR
a. After prolonged use, the Ball
Joint Swivel/Tilt Mechanism
may require increased friction.
This can be achieved by
tightening the 3 Ball Joint
Friction Screws (A) using Hex
Key C.
a. Unfold Crossbar Wings to accommodate 3 or 4 monitors per row.
b. Fold away Crossbar Wings to hide behind 1 or 2 monitors.
www.humanscale.com
A
Hex Key A (8mm) Hex Key C (4mm)
Hex Key D (2mm)
Vertical Assembly Cap Crossbar Cap Vertical Assembly
Flat Bearing
Hand Crank
Hex Key B (5mm)
HSIPM0
091
1
Para/Flex
Instructions