Placing originals on the document table – Bell & Howell S02294A User Manual
Page 20
Image Scanner User's Manual
- 12 -
¡
Placing originals on the document table
Original condition
Originals that meet the following specifications can be handled by the document feeder.
Caution:
When an original needs to be scanned that does not meet the following specifications,
place the original on the contact glass and scan in book mode, otherwise your original may
be damaged.
E
Size:
Length:
120
‘
432 mm
Width:
69
‘
297 mm
E
Weight:
11.2 lb
‘
34.1 lb (42 g/m
2
‘
128 g/m
2
)
E
Stack:
All originals must be the same width
Height is less than 12 mm
(Ex: 20lb paper
~
100, 24lb paper
~
85)
E
Paper:
Bond paper, PPC paper, or art/coating paper
E
Thickness:
0.07
‘
0.16 mm
E
Written material: Toner, pencil, marker ink, water sign pen, ball point pen or ink that does not
adhere to the contact glass and the roller. Ink must be dry.
E
Curl:
Back curl:
Less than 5 mm
Face curl:
Less than 10 mm
If curled, flatten it within the above levels.
E
Others:
No tears, wrinkles, perforations, and pastes.
No projections such as a clip or staple.
No folds within the following area.
Folds should not be on this area
because the optical sensor
watches this area of an original.
1 mm
10 mm
center
c
feeding direction
03_IS430-BODY
97.5.8, 5:36 PM
Page 12
PageMaker 5.0J