Blue Rhino 71400 - Manual (Page 6)

5 Owner’s manual and assembly instructions: 71400 portable outdoor heater 3/3/03
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Assembly Instructions
General Components & Features
Familiarize yourself with all components before proceeding. Refer to page 4 for all hardware components.
Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged,
contact 1-800-762-1142 for assistance.
Additional Requirements
The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to
assemble without proper tools.
(1) - 7/16” Wrench
(1) - #2 Phillips Head Screwdriver
(1) - Leak Detection Solution (Instructions on how to make solution are included in Step 5)
(1) - 20 lb.(4-5 gallon) precision filled LP Gas Grill Cylinder
Note: You must follow all steps to properly assemble heater.
Step 1 – Attach Emitter Screen
• Line up 4 holes on bottom of Emitter Screen with corresponding holes
in Emitter Bottom, and insert (4) Medium Screws in holes until tight.