HYDAC HMGWIN 3000 - Manual (Page 24)

HMGWIN 3000 English Page 24
Edition 06/2007 – V02 R01
• In the upper section you can select whether the recording is to be stored in black &
white (“Monochrome“) and whether the PDF file is to be opened directly after being
created (“Show PDF document“).
• In the lower section you can decide which portions of the recording are to be contained
in the PDF document by clicking on the checkbox before the particular portion.
• Click on “Create PDF“ to create the pdf document.
• Click on “Cancel“ to cancel the action.
3.6.7 Print
• To print a recording, click on the “File“ dialogue box and select “Print“ in the drop-
down menu, or click on “Print“ at the bottom left of the window.
• The “Print“ window opens.
• In the upper part you can choose whether you want to print the recording in black &
white only (“Monochrome“).
• In the lower section you can decide which portions of the recording are to be contained
in the printout by clicking on the checkbox before the particular portion.
• Click on “Print“ at the bottom of the window.
• Click on “Cancel“ to cancel the action.
3.6.8 Close
• To close the measurement curve you are currently editing, click on the “File“ dialogue
box and select “Close“ in the dropdown menu, or click on “Close“ at the bottom left of
the window.
3.6.9 Close All
• To close all open measurement curves, click on the “File“ dialogue box and select
“Close all“ in the dropdown menu, or click on “Close all“ at the bottom left of the win-
dow.
• If you have not saved your recordings, you are prompted to do so.