Hydro-Logic StealthRO100 - Upgrade Kit for Small Boy User Manual
Page 2
3) Push the Reverse Osmosis membrane housing assembly onto clips with the cap side towards
the right side of the unit.
4) Push the elbow stem fitting at the end of the white tube into the "outlet" fitting of the Small
Boy. See image below
5) Install Small Boy purified water tube (blue) tubing that you removed in step #1 to the open
fitting on black automatic shut off valve. The waste water tubing (black) is already installed into
the flow restrictor.
6) cut the inlet tubing close to the inlet fitting and install pressure gauge assembly.
7) Flush initial 1 hour of water down the drain. You are now ready to use the system. Consult
the included instructions for Stealth-RO100 from this point forward. Contact us for help if
needed.
www.hydrologicsystems.com
888-426-5644