iCreation i-400 - Manual (Page 9)

8
Connecting
Connect the plug of the power supply to the power jack of
the base, and then plug the power supply into a standard
AC wall outlet.
Charging
The BT handset uilt-
in rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
iPhone, simply place it on the base.
comes with a b
BT Handset & iPhone
To AC wall outlet
Notes:
The red indicator light
e, or
else the handset will shut down when battery is very
low.
will be on indicating the handset's
charging properly, and it will be off when the battery is
fully charged.
When the battery is low, the handset beeps twice every
30 seconds and the red indicator flashes three times
every 30 seconds. Charge it as described abov
13
Chapter 3: Operations
Making a Call
Make calls on the iPhone in normal ways.
During a call, you can switch between your BT handset
and your iPhone.
Using the iPhone
Call Switching between the BT Handset and an iPhone
During a call using the iPhone, click on the display
of the iPhone, then click . The call switches
to the .
To switch back, click on the iPhone. The
call switches back to the iPhone.
BT handset
1
2
Your handset also support voice dialing with some
iPhones. Before using this function, set up "voice-tags" on
your iPhone.
tell
Press MFB twice on the handset within 0.8 seconds.
When a beep occurs, the desired number.
Voice Dialing
Bluetoo th hand set
Bluetooth handset
Method 1: Using the iPhone