INCRA Miter 1000SE - Manual

Manufactured by Taylor Design Group, Inc. P.O. BOX 810262 Dallas, TX 75381 ©2008 by Taylor Design Group, Inc. All rights reserved.
°
When using the INCRA Miter1000SE in conjunction with any other tool, first read and follow all instructions and safety
information in that tool’s owner’s manual.
° Never let the saw blade come in contact with the aluminum or steel components of the INCRA Miter1000SE.
° When using the INCRA Miter1000SE, always keep your hands clear of the saw blade and the line of cut.
° Always turn off the power and make sure that the saw blade comes to a complete stop before changing the setting of any part of
the INCRA Miter1000SE.
° Always securely tighten the large black clamping knob before starting any cut.
°
Wear safety glasses, hearing protection, and follow all normal shop safety practices.
° After making any adjustments to the miter angle or fence position of your INCRA Miter1000SE, always verify safe clearance
between the blade and fence before turning on the saw.
° After making any adjustments to the fence position on the INCRA Miter1000SE, always make sure that the two socket head
screws are securely tightened.
° When using the INCRA Flip Shop Stop to position a piece for a cut, always hold or otherwise clamp the board between the stop
and the blade.
Owner’s Manual
w w w . i n c r a . c o m
Important safety instructions for using the INCRA Miter1000SE SAFETY:
Before using the INCRA
Miter1000SE, read and
follow all of the instructions
and safety information in
this owner’s manual.