INCRA TS-II Table Saw Fence - Manual

The only table saw
fence with
Automatic
Positioning Control TM
Safety . . . . . . . . . . . . . . . . . . . 2
Fasteners and Hardware Lists . . . . 2
Rail Assembly . . . . . . . . . . . . . . 4
Base Mount Assembly . . . . . . . . . 6
Fence Assembly . . . . . . . . . . . . . 8
Final Calibration . . . . . . . . . . . . 9
Blade Guard Adjustments . . . . . . 11
Extension Table . . . . . . . . . . . . 11
Auxiliary Fence Mounting . . . . . 12
Maintenance . . . . . . . . . . . . . . 12
Product Information . . . . . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . 12
CONTENTS
OWNER’S MANUAL
Please read this owner’s manual before use and
keep it at hand for reference.
Note: The INCRA TS II system consists of three
packages. One of the packages contains the rails
and another the base mount unit. These two
assemblies are covered fully by this
owner’s manual. The
third package contains
the INCRA Jig Ultra 24.
Read all of this TS II
owner’s manual and pages 2, 3, 6 and 7
of the Ultra 24 owner’s manual.
In just about an hour or so, you are going to be
operating one of the most exciting new tools in
today’s woodshops. Your table saw will undergo
a transformation, and what was once an average
saw will emerge a precision woodworking
machine, one you’ll be proud of for years to
come. So take a few minutes to read over the
safety information and mounting instructions, then
grab a phillips screwdriver and a set of wrenches
and let’s get started.