INCRA TSIII Table Saw Fence - Manual

The only table saw
fence with Automatic
Positioning Control
TM
Safety . . . . . . . . . . . . . . . . . . . 2
Fasteners and Hardware Lists . . . . 2
Rail Assembly . . . . . . . . . . . . . . 4
Base Mount Assembly . . . . . . . . . 6
Fence Assembly . . . . . . . . . . . . . 8
Final Calibration . . . . . . . . . . . . 9
Blade Guard Adjustments . . . . . . 11
Extension Table . . . . . . . . . . . . 11
Auxiliary Fence Mounting . . . . . 12
Maintenance . . . . . . . . . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . 12
CONTENTS
OWNER’S MANUAL
Please read this owner’s manual before use and
keep it at hand for reference.
Note: The INCRA TS III system consists of three
packages. One of the packages contains the rails
and another, the base mount unit. These two
assemblies are covered fully by this
owner’s manual. The third
package contains the INCRA
Jig Ultra 32. Read all of this
TS III owner’s manual and
pages 2, 3, 6, 7, 18 and 19 of
the Ultra owner’s manual.
In just about an hour or so, you are going to be
operating one of the most exciting new tools in
today’s woodshops. Your table saw will undergo
a transformation, and what was once an average
saw will emerge a precision woodworking
machine, one you’ll be proud of for years to
come. So take a few minutes to read over the
safety information and mounting instructions, then
grab a phillips screwdriver and a set of wrenches
and let’s get started.