INCRA Track & Shop Stop - Manual

®
SYSTEM OWNER’S MANUAL
hat does an INCRA tool do better than any other? Just ask
that question to any of the thousands of satisfied INCRA router
table or table saw fence owners and they’ll all give the same
answer, “It positions your work with perfect accuracy and repeatability.”
Over the years, many of these same customers have requested a
means of adding these benefits to many of the other tools in their
shops. Your new INCRA Track does just this by providing the same
patented automatic positioning control used on the famous INCRA Jig
in a versatile track system. Combined with the modular design of the
INCRA Shop Stop, you'll be able to add INCRA precision to virtually
every jig, fixture, miter gauge, and stationary tool in your shop.
W
CONTENTS
General Mounting Instructions
Slotted Hole Mount . . . . . . 2
Rear T-slot Mount . . . . . . . 2
Bottom T-slot Mount . . . . . . 2
Attaching the Racks . . . . . . . 3
Positioning the Scales . . . . . . 3
Auxiliary Fences . . . . . . . . . . 4
Applications . . . . . . . . . . . . . . 5
Miter Gauge . . . . . . . . . . . 5
Jigs and Fixtures . . . . . . . 6
Miter, Compound Miter,
and Radial Arm Saw . . . . .
7
Drill Press . . . . . . . . . . . . . 7
SAFETY
Important safety instructions for using the INCRA Track System:
◆ Before using the INCRA Track, read and follow all of the instructions and
safety information in this manual.
◆ When using the INCRA Track in conjunction with any other tool, first read and
follow all instructions and safety information in that tool’s owner’s manual.
◆ Use appropriate safety devices. Keep hands clear of the bit or blade. Always
use a push stick, rubber soled push block, or other safety devices to keep
your hands safely away from the cutting tool.
◆ Never let any part of the INCRA Track interfere with another tool’s safety
guards or other safety equipment.
◆ Never let the bit or blade come into contact with the aluminum body of the
INCRA Track.
◆ Always turn off the power and make sure the bit or blade has come to a
complete stop before changing the setting of any part of the INCRA Track or
INCRA Shop Stop.
◆ Wear safety glasses, hearing protection, and follow all normal shop safety
practices.
From the
makers of
INCRA JIG
FOR USE WITH …
◆ Miter Gauge
◆ Jigs & Fixtures
◆ Miter Saws
◆ Radial Arm Saws
◆ Compound Saws
◆ Drill Press Fence
◆ INCRA Jig