Belkin F5D6230-3 - Manual (Page 29)

28
STEP 3a: Set up your computers for networking
2. Select “I am adding this computer to my network”. Click “Next”.
3. Windows will now prompt you to insert the newly created client disk
into the PC’s floppy drive. Insert the disk you labeled “Belkin
Networking” into the floppy drive and click “OK”. The following
screen will appear:
4. In the “Computer Name” field type a name for the computer such as
“Computer 2”. Remember, the name must be different from the other
computers on the network.
5. The workgroup name should be filled in with the name you entered on
the previous computer. Do not change this setting.
6. Type in a description such as “Windows 98”. This can be anything you
want and does not have to be different or the same as any other
computer on the network. You may also leave this field blank.