Appendix d. handheld remote controller – INFICON SQC-122 Thin Film Deposition Controller Operating Manual User Manual
Page 63
Advertising
Appendix
D. Handheld Remote Controller
The Handheld Controller provides the capability of adjusting output power remotely
when the SQC-122 is in Manual Mode.
ABO RT
S igma
instrum ents
Σ
Handheld Controller
To use the handheld controller, attach the cable from the handheld controller to the
Remote jack on the SQC-122 front panel. Select a Process using the SQC-122 front
panel SoftKeys. Press Next Menu until the Auto/Manual SoftKey is displayed. Press
Auto/Manual to change to Manual power mode (SoftKey shows Manual/Auto). Press
Start to begin the film deposition.
You can now use either the front panel Control Knob or the Handheld Controller to
adjust output power. Pressing Abort on the handheld controller stops the film and
returns output power to 0%.
Advertising