3 installation, 1 personnel 3.2 installation, setup, 1 rack installation – INFICON VGC401 Single-Channel Controller User Manual
Page 13
tinb01e1-f (2011-07) VGC401.om
13
3 Installation
Skilled personnel
The unit may only be installed by persons
who have suitable technical training and the
necessary experience.
The VGC401 is suited for incorporation into a 19" rack or
a control panel or for use as desk-top unit.
DANGER
DANGER: damaged product
Putting a damaged product into operation can
be extremely hazardous.
In case of visible damages, make sure the
product is not put into operation.
The VGC401 is designed for installation into a 19" rack
chassis adapter according to DIN 41 494. For this pur-
pose, four collar screws and plastic sleeves are supplied
with it.
DANGER
DANGER: protection class of the rack
If the product is installed in a rack, it is likely
to lower the protection class of the rack
(protection against foreign bodies and water)
e.g. the EN 60204-1 regulations for switching
cabinets.
Take appropriate measures for the rack to
meet the specifications of the protection
class.
3.1 Personnel
3.2 Installation, Setup
3.2.1 Rack
Installation