Aastra Telecom 480i SIP (Release 1.4) - Manual (Page 11)

480i IP Phone User Guide 5
Customizi
ng Your Phone
Customizing Your Phone
Setting Your Options
Pressing the % key gives you a
list of configuration options. You
can also change these options in
your phone through the Aastra
Web UI. Refer to the Aastra
480i Installation Guide for
information on less advanced
configuration options.
Note: Some options should only be
set up or changed by a network
or system administrator. Please
contact your system or network
administrator before adjusting
any administrator level options.
For more information on these
options, administrators should
refer to the Aastra SIP 480i/480i
CT/9112i/9133i IP Phone
Administration Guide.
Aastra Web UI
You can access specific
configuration options on the 480i
phone using the Aastra Web UI.
In order to access the Aastra Web
UI, you will need to know the IP
address of your phone.
Finding Your Phone’s IP Address
1. Press % to enter the Options
List.
2. Use s to scroll down the list
of options to Phone Status and
press the Show softkey.
3. Use s to scroll to Network
Status and press the Show
softkey.
4. Press the IP Addr softkey.
5. You will now see your phone’s
IP Address.
IP Phone UI
Options List
8.Call Forward
9.Network
10.SIP Settings
11.Phone Status
Show
Done
Phone Status
1.Network Status
2.Firmware Version
3.Reset Phone
4.Factory Default
Show
Done
IP Addr
Done
Attr.
LinkStat.
Negotiat.
Speed
Duplex
MAC Addr
Port0
Link
Auto
100M
Full
Port1
N/Link
Auto
10M
Half
Done
IP Address of Phone
192.168.0.100