Aastra Telecom 480i SIP (Release 1.4) - Manual (Page 8)

2 480i IP Phone User Guide
Introduction
• The IP phone must be config-
ured for a specific type of proto-
col to use. (TFTP is enabled by
default). You can configure the
following protocols on the IP
phone:
- TFTP (Trivial File Transfer
Protocol)
- FTP (File Transfer Protocol)
- HTTP (Hypertext Transfer
Protocol)
• A 802.3 Ethernet/Fast Ethernet
LAN
• Category 5/5e straight through
cabling
• Power over Ethernet (PoE)
power supply (optional acces-
sory – necessary only if no inline
power is provided on the net-
work).
Installation and Setup
If your system administrator has
not already setup your 480i phone,
please refer to the Aastra 480i
Installation Guide for basic
installation and physical setup of
the 480i. For more advanced
administration and configuration
information, system and network
administrators should refer
to the Aastra SIP 480i/480i CT/
9112i/9133i IP Phone
Administration Guide.