I.R.I.S. 402 - Manual (Page 32)

Date and Time:
Date and time adjustments for the IP2 camera are defined within this section. Settings can be set to
automatic (Synchronize with NTP Server / PC) or manual.
Current Date & Time:
Display current system date/time settings. The date format can be changed from the drop-down list in
Configure Date & Time.
Configure Date & Time:
Keep Current Date & Time: The option of keeping current date and time, not to be adjusted.
Synchronize with NTP Server: automatic method for date/time adjustment. The IP Camera must be able to
gain access to the given NTP server (e.g. time.windows.com), which is usually via an Internet connection.
The IP camera system can therefore synchronize with the time server.
NOTE: To apply “synchronize with NTP Server”, a Time Zone must be selected for referencing to the local time.
Synchronize with PC: The PC connected to the IP camera can also provide date/time information.
However, if the PC is connecting from a time zone different from where camera is installed, the system will
display a warning message for time zone differential.
Set manually: Manually adjust the date / time for the system
Date Display Format: The system date can be displayed in the format of DD/MM/YYYY,
MM/DD/YYYY or YYYY/MM/DD.
Time Zone: Select an appropriate time zone for local where IP camera is installed. The automatic
adjustments will be applied based on the selected time zone. Check the “Daylight Saving Time” checkbox
for areas that are observing DST.