Jabra BIZ 2400 User Manual - Manual (Page 6)

6
R
L
3
3. How to position the ear hook on the ear hook ring for left or right ear use.
The ear hook wearing style has two parts: an ear hook and an ear hook ring. One end of the ear hook forms a
pin that presses into a loop on the ear hook ring and holds it there.
You will wear the headset with the ear hook behind your ear and the ear hook opening pointing down towards
your jaw. Decide on which ear you would like to wear the headset and assemble the ear hook and ear hook ring
appropriately.
To change from one ear to the other, pull the ear hook up and away from the loop, and press into the other side
of the loop. Then remove the headset from the ear hook ring. Rotate it and replace it again with the cable posi-
tioned at the ‘L’ or ‘R’ for the selected wearing side as described in point 2.
4
2 cm
3/4"
5 6
4. How to wear the ear hook.
To wear the headset, slip the ear hook behind your ear while keeping the ear gel centred into the middle part
of your ear. The ear hook comes in two sizes for optimal fit. Please try both for best personal support and fit.
5. How to position the microphone.
Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less
than 2 cm from the front of your mouth.
6. How to rotate the boom arm.
The boom is free to rotate 360o.