Jabra PRO 920 User Manual - Manual (Page 23)

24
english
battery indicator slow flashing blue. sleep mode will end when docking or
undocking the headset.
Automatic headset power off
after 60 minutes of no link between headset and base, the headset will
automatically power off. to power the headset on, tap the multi-function
button.
7.5 REmOTE CALL CONTROL
Remote call control (or hookswitch) is the control mechanism used to answer
or end a call on a desk phone. to enable the Jabra PRO 920 headset to answer
or end calls, the desk phone will need to have a Jabra Link or a Gn1000
installed.
Electronic Hookswitch (EHS)
an electronic hookswitch is a feature on some desk phones that enables calls
to be answered or ended by the headset multi-function button. to use this
feature an electronic hookswitch adapter (e.g. Jabra Link) needs to be
connected between the desk phone and the Jabra PRO 920 base. to purchase a
Jabra Link contact your supplier, or visit www.jabra.com.
Gn1000
a Gn1000 manually lifts the handset from the desk phone receiver to
automatically place or answer a call. to purchase the Jabra Gn1000 remote
handset lifter contact your supplier, or visit www.jabra.com.
7.6 HOW TO CHANGE THE ADVANCED SETTINGS
seven advanced settings can be configured using the base. Voice prompts
indicate the current setting and value. the seven settings are:
• Mute reminder tone.
• Ringtone.
• audio protection.
• Wireless range.
• auto sleep mode.
• Remote call control.
• Wideband audio.