Jabra EXTREME2 - Manual (Page 5)

4
english
Jabra EXTrEME2
JABRA VoICe GUIDAnCe
The Jabra EXTrEME2 is loaded with voice announcements that
talks you through setup and daily operation . In the table below
you can see the most common announcements
Voice guidance
EXTREME2 announcements
to you
What it means
“power on” announced when EXTrEME2
is turned on
”power off” announced when EXTrEME2
is shut down
”Call ended” You end a call
“Welcome! You are now
ready for pairing . Go to the
bluetooth menu on your
phone .
(5 seconds delay)
Turn on or enable bluetooth .
(5 seconds delay)
Search for devices and select
your Jabra hands free device .
Select pair or OK . If asked for a
pIN code enter 0000”
The EXTrEME2 is in pairing
mode .
announced automatically
when powered on the
first time and whenever
EXTrEME2 is put into pairing
mode .
“pairing failed” announced if pairing fails
“pairing cancelled” You cancel pairing
“Connected” announced when EXTrEME2
is connected to a phone
“Disconnected” announced if a connected
phone/device is turned off,
goes out of range or has
bT disabled while in range
and while the headset is still
turned on .