Taking care of your headset – Jabra SPORT WIRELESS+ User Manual

Page 15

Advertising
background image

14

JABRA SPORT WIRELESS+

I cannot use Reject call, Call on hold or Redial
These features are dependent on your phone supporting them;

please consult your phone’s manual for details .

I cannot hear music in the headset
Ensure that the headset is connected to your Bluetooth enabled

device .
You may have been out-of-range (10 meters) to your Bluetooth

enabled device or the headset might have experienced an ESD

(Electrostatic discharge) incidence . Press the Answer/End Button

(A) to re-establish the Bluetooth audio link - Increase the volume

on your device .
Make sure that the Jabra SPORT WIRELESS+ is charged .

The music I hear sounds very poor
Make sure the other device supports Bluetooth 1 .1 or higher

including the Advanced Audio Distribution Profile (A2DP) for

music streaming .
If the above procedure did not help then it is possible that your

phone is using the stereo audio connection in a different way . You

can enable this mode on Jabra SPORT WIRELESS+ by performing

pairing in the following way:
- Remove the Bluetooth connection to Jabra SPORT WIRELESS+

on your phone

- Make sure the headset is turned off
- Press and hold the Answer/End button (A) for more than

5 seconds until the indicator light flashes blue

- Go through the regular steps in pairing the headset to a

Bluetooth device .

TAKING CARE OF YOUR HEADSET

- Always store the Jabra SPORT WIRELESS+ with the power off

and safely protected

- Avoid storage at extreme temperatures (above 45°C/113°F –

including direct sunlight – or below -10°C/14°F) . This

can shorten battery life and may affect operation . High

temperatures may also degrade performance .

- Ensure the USB cover is completely covered to protect against

water/sweat .

Advertising