Jabra LINK 280 - Manual (Page 10)

10
Once you have selected the mobile as one of the functions for your softbuttons, a Mobile tab will appear in the
Jabra Control Center.
You will be able to clear your paring list, thereby deleting the mobile phones paired to the controller. Once you
have clicked Clear pairing list — the controller will automatically enter a pairing mode.
By clicking on Enter pairing mode, the controller will enter pairing mode and you are now able to pair the
controller to a mobile phone — see the section on pairing your controller to a mobile phone, above.
How to pair the headset with a mobile phone without using Jabra PC Suite:
1. Connect your headset to your computer.
2. Decide which of the two soft buttons on the USB controller you would like to use to control your mobile
phone.
3. Press and hold the chosen soft button for 9 seconds, and release the soft button when the USB controller lights
up blue. The headset will now be in pairing mode.
4. Make sure that Bluetooth is active on your mobile phone and put your phone into Bluetooth finding mode.
The exact procedure for doing this varies by mobile phone manufacturer and model—see your mobile phone
manual for details.
5. Your phone now looks to see if any nearby Bluetooth devices are advertising themselves for pairing—this
should include your headset. Use your phone’s controls to identify and select the “Jabra BIZ 2400” device.
Your phone may also ask for the headset’s pass code. The pass code for all Jabra devices is 0000 (four zeros); if
necessary, enter this code into your phone and commit the code (e.g., by pressing on an OK button).
6. Your phone will now connect to the Jabra BIZ 2400 USB controller. If the attempt fails, please try again. If you
are still having trouble, please check your mobile phone documentation and/or contact technical support for
Jabra and/or your mobile phone.
Answering an Incoming Mobile Call
When a call arrives at your mobile phone, you will hear a ring tone in the headset and the controller will flash
blue and green. To answer the call, tap the soft button that you assigned to the mobile phone. When you are
done talking, tap the same button again to hang up.
Placing a Call over Your Mobile
To place a call with your mobile phone while using your controller, simply dial your mobile phone as usual.
Usually, the audio will be sent to your headset automatically whenever it is in range of your mobile phone.
Please see your mobile phone manual for details about how your specific mobile phone interacts with a Bluetooth
device and which, if any, configuration settings are available for this feature.