BRK electronic CO250B User Manual

Monoxide

Advertising
background image

ELECTROCHEMICAL

CO SENSOR

Most accurate technology available for

detecting carbon monoxide as compared to

other sensing technologies.

TWO SILENCE

FEATURES

Silences low battery chirp for up to

eight hours or silence nuisance alarm

for several minutes.

END OF LIFE SIGNAL

Provides audible notice when alarm

needs to be replaced.

TAMPER RESISTANT

LOCKING PIN

Locks alarm cover to prevent

removal of battery. Perfect for

apartment, dormitory or hotel

applications.

9V BATTERY

INCLUDED

Available in the following versions:

CO250B

Alkaline Battery

CO250LB

Long Life Lithium Battery

CAT.

CO250B/CO250LB

9V Battery Powered

CO

BRK Model CO250 is a single station carbon monoxide alarm specifically
designed for residential and institutional applications including sleeping rooms of
hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined
in standard NFPA 101. Model CO250 has been fully tested and complies with,
UL2034, NFPA 720, and NFPA 101 and other agencies that model their codes
after the above agencies. It meets building codes where battery operated
carbon monoxide alarms with silence are required and with model building
codes published by the ICC.

BRK Model CO250 is a state of the art carbon monoxide alarm designed to
provide early warning of the presence of carbon monoxide. It features an
electrochemical carbon monoxide sensor, an 85dB horn, a full function test
switch and a red LED light that indicates DC power or alarm. The CO250B
features a 9V alkaline battery and the CO250LB a 9V long life lithium battery.
This alarm has two silence features. Low Battery Silence: Temporarily silence the
low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several
minutes. It also features a tamper resistant locking pin that locks alarm cover to
prevent removal of battery. Perfect for apartment, dormitory or hotel applications.
The compact, low profile design complements any décor. Battery installation and
removal can occur while the unit is mounted to the ceiling or wall via the hinged
cover. When voltage drops to a pre-set warning level, the horn will “chirp”
approximately once per minute to indicate a fresh battery is needed. To insure
the battery is always replaced properly, the cover
is designed to resist closing when the
battery is missing. Designed
for wall or ceiling
mounting. Includes
mounting
anchors and
screws.

ver

he

C A R B O N

MONOXIDE

A L A R M

7

Advertising
This manual is related to the following products: