6 configuration – JUMO 705030 mTRON T - Digital Input/Output Module Operating Manual User Manual
Page 34
Advertising
6 Configuration
34
Level at suppression
When signal suppression is active, the input signal and the inverting parameter are irrelevant.
In this case, a fixed signal with a configurable level is issued (to the system bus).
Status after change of configuration
Modified parameters are incorporated immediately.
Behavior after power on
After power on, all channels of the digital input/output module are initially configured as input.
When the initialization phase is over and valid values of the external input signals are available,
the outputs are activated (according to the configuration).
Advertising