JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 59)

59
7 Visualization
Channel display
The function switches to the channel display.
 Chapter 7.4.2 "Channel display", page 60
Group rotation
In contrast to the "Group selection" function, in which any group can be selected, this function
displays the groups one after the other.
Home button
This function calls up a defined visualization. The function must be activated and configured
via the setup program.
 Setup program:
HMI > C ONFIGURATION LEVEL > S CREEN > U SER OPERATING LEVEL
(1)
(1) Group number
NOTE!
The function is only available if more than one group is active.