JUMO 706585 LOGOSCREEN fd Recorder with diecast zinc front Installation Instructions - Manual (Page 24)

4 Electrical connection
24
Interfaces RS232C for barcode reader
9-pin SUB-D socket connector
2 RxD receive data
3 TxD transmit data
5 GND ground
Connector 2
PROFIBUS-DP
9-pin SUB-D socket connector
(extra code)
3 RxD/TxD-P B conductor
Receive/transmit data
positive
5 DGND
Data transmission ground
6 VP supply voltage positive
8 RxD/TxD-N A
conductor
Receive/transmit data
negative
Connector 3
USB host interface
for memory sticks
The recorder without stainless
steel front also has a USB host
interface on the front panel,
connected in parallel. The two
interfaces cannot both be
operated at the same time.
Connector 5
Ethernet
RJ45 socket connector
1 TX+ transmit data +
2 TX-
transmit data -
3 RX+ receive data +
6 RX+ receive data -
Connector 6
RS232C
9-pin SUB-D socket connector
(switchable to RS485)
2 RxD receive data
3 TxD
transmit data
5 GND ground
Connector 7
Terminal assignment Connector Diagram
3. 2. 1.
12 13 11
PE N L1
(L+) (L-)
4. 2.
2 1 3 4 5
6 7 8 9
3. 2. 1.
12 13 11
PE N L1
(L+) (L-)
4. 3.
2 1 3 4 5
6 7 8 9
5. 6. 7.
15. 5.
5.
6. 7.
15.
6.
8 1
5. 6. 7.
15.
7.
2 1 3 4 5
6 7 8 9