JUMO 902815 Dtrans T100 Screw-In RTD Temperature Probe Without/With Transmitter Operating Manual - Manual (Page 6)

6
2 Identifying the device version
(7) Process connection (PA)
x x 000 None
x x 103 G 3/8 (3/8" pipe) thread
x x 104 G 1/2 (1/2" pipe) thread
x x 380 G 1/2 (1/2" pipe) thread with CIP-compliant conical seal
with EHEDG certification
x x 601 Taper nipple with cap nut DN 10 DIN 11851 (milk pipe fitting)
x x 604 Taper nipple with cap nut DN 25 DIN 11851 (milk pipe fitting)
x x 605 Taper nipple with cap nut DN 32 DIN 11851 (milk pipe fitting)
x x 611 Clamping nipple (clamp) DN 10/20 according to DIN 32676
x x 613 Clamping nipple (clamp) DN 25/40 (1"/1.5") according to DIN 32676
x x 616 Clamping nipple (clamp) DN 50 (2") according to DIN 32676
x x 617 Clamping nipple (clamp) 2.5" similar according to DIN 32676
x x 681 Weld-in ball socket with clamping thread
x x 682 Weld-in socket with CIP-compliant conical seal
x x 684 Varivent connection DN 15/10 with EHEDG certification
x x 685 Varivent connection DN 32/25 with EHEDG certification
x x 686 Varivent connection DN 50/40 with EHEDG certification
x x 840 Ball weld-in pocket (material 316 Ti)
x x 997 JUMO PEKA with EHEDG certification
(8) Protection tube material
x x 24 Stainless steel 316 L (mat. ref. 1.4404 or 1.4435)
x x 26 Stainless steel 316 Ti (mat. ref. 1.4571) (upon request)
(9) Extra codes
x x 000 None
x x 100 Customer-specific configuration (specifications in plain text)
x x 310 Protection tube stepped down from 6 mm dia. to 3.3 mm dia.
x x 810 Weld-in socket (only for process connection 380)
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Order code
- - - - - - - / ,...
a
Order example
902815/20 - 370 - 1013 - 2 - 6 - 100 - 104 - 24 / 000
a
List extra codes in sequence, separated by commas.