JUMO 902123 Etemp B Push-In RTD Temperature Probe with Terminal Head Form B for Standard Applications Data Sheet - Manual

Seite 1/4
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax: +49 661 6003-607
e-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
e-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
e-mail: [email protected]
Internet: www.jumo.us
JUMO Etemp B
Push-in RTD temperature probe with connection head form B
for standard applications
• Temperature range from -50 to +400 °C
• With built-in measuring insert
• As single or double RTD temperature probes
• Terminal head form B or BUZ
• Available with transmitter
Brief description
Push-in RTD temperature probes for standard applications are preferentially used for measuring
temperatures in liquids and gases. The application areas are, among others, in the air condition-
ing technology and refrigeration engineering as well as the HVAC and apparatus engineering
sector.
The connection head is suitable for ambient temperatures up to +100 °C. In addition to the stan-
dard connection head form B, design BUZ is also available.
The measuring insert is normally fitted with a Pt100 temperature sensor according to DIN EN
60751, Class B in 2-wire circuit; versions with Pt500 or Pt1000 temperature sensors can also be
supplied, as well as 4-wire circuit connections. A transmitter can be optionally integrated into the
connection head.
Basic type 902123/10
Technical data
Terminal head Form B DIN EN 50446, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Form BUZ, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Reduced ambient temperature when using transmitters, data sheet 707030 and 707010
Protection tube Stainless steel 1.4571, ∅ 6 mm, ∅ 8 mm
Measuring insert Pt100 temperature sensor DIN EN 60751, cl. B, 2-wire circuit, built-in
Response times t
0.5
= 5 s, t
0.9
= 14 s in water 0.4 m/s; ∅ 6 mm
Transmitter Analog transmitter, output 4 to 20 mA, data sheet 707030
Analog transmitter, output 0 to 10 V, data sheet 707030
Programmable transmitter, output 4 to 20 mA/20 to 4 mA, data sheet 707010
Accessories Process connection, tube screw connection ∅ 6 mm, ∅ 8 mm
Process connection, sheet steel flange ∅ 6 mm, ∅ 8 mm
Data Sheet 902123
2011-09-26/00537986