JUMO 906125 Platinum-Chip Temperature Sensors of SMD Design Type According to DIN EN 60751, PCS Design Type Data Sheet User Manual
Page 3
10.06/00339298
Data Sheet 90.6125
Page 3/3
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax:
+49 661 6003-607
e-mail:
Internet:
www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
e-mail:
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax:
315-697-5867
e-mail:
Internet: www.jumo.us
Technical data
Self-heating coefficients and response times
Standard
EN 60 751
Temperature coefficient
α
= 3.850 x 10
-3
°C
-1
(between 0 and 100°C)
Temperature range
-50 to +150°C
Tolerance
Temperature validity range Class B:
-50 to +150°C
Measuring current
Pt100
recommended: 1.0mA
Pt500
recommended: 0.7mA
Pt1000
recommended: 0.1mA
Maximum current
Pt100
7.0mA
Pt500
3.0mA
Pt1000
1.0mA
SMD size
Types PCS 1.1503.x (size 1206) and PCS 1.1302.x (size 0805) meet the requirements of
CECC 40401-004/DIN 45 921.
Processing
- Reflow soldering (soldering temperature/time
≤
240°C/8sec)
- Wave soldering (soldering temperature/time
≤
260°C/10sec)
Solder connections
Electro-tinned wrap-around contact with diffusion barrier,
solderability, see IEC 68 Part 2
Operating conditions
Platinum-chip temperature sensors may not be used unprotected in humid ambient
conditions or corrosive atmospheres. The user may have to carry out some checks before
operation.
Please also refer to the Installation Instructions B 90.6121.4 “Notes on the
application of platinum-chip temperature sensors.”
Long-term stability
max. R
0
drift
≤
0.05%/year (see Data Sheet 90.6000 for definitions)
Insulation resistance
>10M
Ω
at room temperature
Self-heating
Δ
t = I
2
x R x E (see Data Sheet 90.6000 for definitions)
Packaging
* cardboard belt, small quantities can also be supplied loose in bags
Storage
In the standard packaging, JUMO temperature sensors, PCS style, can be stored for at
least 12 months under normal ambient conditions. It is not permissible to store the
sensors in aggressive atmospheres, corrosive media, or in high humidity.
Type
Self-heating coefficient E in °C/mW
Response times in seconds
in water
(v = 0.2m/sec)
in air
(v = 2m/sec)
in water
(v = 0.4m/sec)
in air
(v = 1m/sec)
t
0.5
t
0.9
t
0.5
t
0.9
PCS 1.1302.1
0.02
0.15
0.1
0.3
2.6
7.9
PCS 1.1302.5
0.02
0.15
0.1
0.3
2.6
7.9
PCS 1.1302.10
0.02
0.15
0.1
0.3
2.6
7.9
PCS 1.1503.1
0.02
0.20
0.1
0.3
3.3
9.5
PCS 1.1503.5
0.02
0.20
0.1
0.3
3.3
9.5
PCS 1.1503.10
0.02
0.20
0.1
0.3
3.3
9.5