JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Data Sheet - Manual (Page 4)

2013-12-03/00447944
Data Sheet 702540 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 4/6
Temperature probes and adapters
RTD Pt100 with handle and attached connecting cable
Thermocouples NiCr-Ni K with handle and attached compensating cable
Type Construction Description
Immersion probe
702546/01-100
The immersion probe with handle is
particularly suitable for measuring
temperatures in liquids.
The temperature sensor is located in the
probe tip, embedded in a heat transfer
compound. The handle, which is provided
with an anti-kink spring, is made from
temperature-resistant plastic.
Max. measurement temperature: 250°C
Max. temperature of handle:
100°C
Max. temperature of cable: 180°C
Insertion probe
702546/02-100
Thanks to its measurement tip, this probe is
particularly suitable for measuring the core
temperature in food and other soft materials.
The silicone handle is covered by a protective
sleeve and is resistant to corrosive media
such as oil and fatty acids.
Max. measurement temperature: 250°C
Max. temperature of handle:
180°C
Max. temperature of cable: 180°C
Type Construction Description
Flexible immersion probe
(mineral-insulated
thermocouple)
702545/01-...
The immersion probe tip is suitable for
measuring temperatures in liquids.
Max. measurement temperature: 1150°C
Max. temperature of handle:
100°C
Max. temperature of cable: 180°C
Insertion probe
702545/02-...
Thanks to its measurement tip, this probe is
particularly suitable for measuring the core
temperature in food and other soft materials.
The silicone handle is covered by a protective
sleeve and is resistant to corrosive media
such as oil and fatty acids.
Max. measurement temperature: 250°C
Max. temperature of handle:
180°C
Max. temperature of cable: 180°C
Surface probe
702545/03-004
The surface probe is particularly suitable for
measurement on very small and uneven
objects with poor heat conduction,
for instance electronic components, glass,
ceramic.
The thermocouple is mounted on a spring
plate so that the probe can also be applied
obliquely to the surface.
Max. measurement temperature: 400°C
Max. temperature of handle:
100°C
Max. temperature of cable: 180°C
Surface probe
702545/03-015
This surface probe enables highly accurate
and easily reproducible measurements on flat
surfaces.
Since the spring bands of the probe are
transversely linked, the measurements are
largely independent of the applied pressure
and the contact angle.
Max. measurement temperature: 500°C
Max. temperature of handle:
110°C
Max. temperature of cable: 180°C
The cable length for all probes is about 1500 mm. The insertion probes are protected to IP67.
Probes with type J and T thermocouples on request.
4
Ш
100
200 (100)
Ш
1,5
4
Ш
100 (150)