Hardware kit for congo cage assembly, That's it – Kargo Master Congo Cage For YJ, CJ7, TJ 7 TJ Unlimited (50331) User Manual
Page 5
SILIC
ONE
SEAL
ANT
Rusty Joint
(WITHOUT SEALANT)
Tighten down all nuts & bolts and
THAT'S IT!
You are now ready to use your rack.
Apply a healthy air tight bead of silicone around every swaged joint to prevent
moisture from leaking into and out of the joint. If this is not done properly, the
inside surface of the tubes can rust and rusty water can leak out. Maintain this
joint seal throughout the life of your rack.
50331
50301
50311
HARDWARE KIT #
For TECHNICAL SUPPORT Call:
1-800-343-7486
Monday- Friday 8:00 A.M. to 4:30 P.M. ( PACIFIC )
®
HARDWARE KIT FOR
CONGO CAGE
ASSEMBLY
DETAIL: Front Leg Shock Absorbers
DETAIL: Seal swage joints:
FRONT LEGS
(DRIVERS SIDE)
RUBBER WASHERS
FLAT WASHER
EXTERNAL TOOTH LOCK WASHER
CAP SCREW
( TIGHTEN DOWN TO COMPRESS RUBBER TO 1/8” )