Katun Sharp AR 207 Copiers - Toner Refill Kit - Manual (Page 4)

8. Reinstall fill hole plug. Wipe away any residual toner with a
soft cloth.
8
11
10. Install new Katun Integrated Circuit Chip and secure with two
screws removed in Step 9.
10
9. Position cartridge so you are facing Integrated Circuit Chip.
Remove two screws holding the Integrated Circuit Chip, then
remove and dispose of chip.
9
11. Place toner cartridge in poly bag. Toner cartridge is now ready
for use.
Note:
• Do not store refilled cartriges in an upright position.
• Cartridge must be shaken well before installation.