Kifco T40x1320 360,000 - 380,539 Operator Manual - Manual (Page 41)

39
Assembly
Water-Reels are usually shipped with the primary assembly complete. The only items to
assemble at the destination are:
1. Wheels. Make sure all lug bolts and axle adjustment bolts are tight. They must be
rechecked after being towed one mile.
2. Sprinkler Cart. Attach the sprinkler cart to the tube end.
3. Sprinkler. Install on the sprinkler cart riser pipe.
4. Sprinkler Nozzle. Install the appropriate sprinkler nozzle.
5. Sprinkler Cart Lift Arm. Install the sprinkler cart transport lift arm on Water-Reels
equipped with the single arm lift.
Final adjustment of the sprinkler cart lift assembly should be made upon completion of the
first irrigation run. The lift hooks should be located directly above the sprinkler cart when
the sprinkler cart is completely drawn up to the compensation/shut-off bar. This exact
location is not possible before the Water-Reel has been operated because the irrigation
tube may be loose on new units, particularly if they have been shipped a long distance.