Kinetik Your fitness S1C - Manual (Page 8)

USING THE SENSITIVITY SWITCH
BATTERY REPLACEMENT (AG10)
Attach the Digital Stepometer to the waistline of your
clothing and walk at your normal pace
Count your actual steps and compare with the reading
displayed
Using the switch inside the battery compartment to move one
click at a time until accuracy is achieved
Open the battery compartment by sliding the cover down
Remove the old battery
Insert the new battery making sure that the positive pole
(+) is facing upwards (as shown)
Close the battery compartment cover
If the battery leaks and comes into contact with the skin
or eyes wash immediately with copious amounts of water
Batteries should be handled under adult supervision