Retrieving memory status list, Retrieving fax messages – Brother MFC 1970MC User Manual
Page 78
70
C H A P T E R E I G H T
Retrieving Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if you
have any fax messages.
1
Dial your FAX/MFC’s number.
2
When you hear the beep, immediately enter your Remote Access Code
(The factory setting is
1
5
9
).
3
When you hear two short beeps, use the dial pad to press
9
6
1
.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax
machine where you want the Memory Status List forwarded, and then press
.
You cannot use
and
as dial numbers. However, if you want to store a
pause, press
.
5
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints
the Memory Status List.
Retrieving Fax Messages
1
Dial your FAX/MFC’s number.
2
When you hear the beep, immediately enter your Remote Access Code
(The factory setting is
1
5
9
).
3
As soon as you hear two short beeps, use the dial pad to press
9
6
2
.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax
machine where you want your fax messages forwarded, and then
press
.
You cannot use
and
as dial numbers. However, if you want to store a
pause, press
.
5
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints
your fax messages.