Klein Tools Harnesses - Manual

Introduction
Instructions for the Proper Use and Care
of Klein ® Harnesses
These instructions explain how to use, inspect
and maintain Klein Harnesses.
Klein manufactures a full line of occupational
Protective Equipment (OPE). Each product is a spe-
cific component of an OPE system for fall protection.
As required by OSHA, Klein harnesses are designed
to arrest free falls and to distribute impact forces
over thighs, pelvis, waist, chest and shoulders. In
addition to fall-arrest protection, many Klein Full-
Body Harnesses feature additional OPE applica-
tions (such as positioning, suspension and retrieval)
in selectable integrated units.
Workers who use Klein OPE Harnesses must be
instructed on how to use them correctly. They must
also read, understand and follow all instructions and
warnings contained in this booklet and any warnings
or instructions attached to and/or packed with this
product and all other tools, devices and equipment
before each use.
Remember the A-B-C Rule:
To be complete, an OPE system must include at
least one piece of equipment from each of the
A-B-C components (for an example, see Figure 1).
Some OPE systems may include more than one
piece of equipment in each component. Choosing
the proper equipment depends on the job-site and
the application. A competent person, as defined by
OSHA, must make these equipment decisions.
Figure 1
(A) Anchorage
(C) Connecting Device
(B) Body Wear
Klein harnesses must NOT be used
by anyone who has not read, understood and fol-
lowed all the instructions and inspection proce-
dures contained in this booklet. Failure to observe
these instructions and inspection procedures could
lead to serious injury or death. Training and
instruction review should be repeated at regular
intervals by the user and his or her employer.