Koolance LGA 775 Adapter - Manual (Page 2)

3 4
If the Spacer is required for your
motherboard (CPU-300 model only),
center it on the CPU. Apply more thermal
paste to the top of the spacer, and spread
evenly as was done for the CPU.
The P-4 socket 478 bracket clips (included
with CPU-300/305 coolers) are used for
LGA 775 boards. Assemble the bracket by
inserting these clips into the center slider.
The temperature sensor should
already be installed into the CPU
Cooler. (Please see the CPU-300
or CPU-305 installation sheet for
more details.)
Fit the cooler and mounting bracket
onto the CPU socket. The bracket
clips slide inward and outward in
order to hook to the rail holes.
Check that the bracket clips are aligned
in all 4 holes before installing the tension
screw.
The CPU-300/305 Cooler will use the black
tension screw, and the center hole for LGA
775 processors. (Please see the CPU-300
or CPU-305 installation sheet for more
details.)
For CPU-300 models, the top rail holes are used with the LGA 775 Spacer.
If the Spacer is not used, the bottom holes will receive the bracket clips. For
CPU-305 models, the bottom holes are always used without the spacer.
(Top Holes) Clip alignment WITH Spacer
(Bottom Holes) CPU-300 clip alignment
WITHOUT Spacer, or for CPU-305