Koolance CHC-125-R - Manual (Page 2)

3 4
If you have retention springs,
use the appropriate length of
retention spring included to
secure the cooler.
Place the
cooler on
your chipset.
If you have a screw
mount, set the bracket
on the cooler. Be sure
to fi t the bracket arms
over the mounting
post screws.
Tighten thumb nuts
to mounting post
screws by hand.
The cooler should
now be secure.
Remove the protective fi lm from
the cooling block.
Install Cooler
Screw-Mounted
Retention Spring
The bracet included
is designed to fi t a
range of mounting
post spaces.
43.2 mm - 93.7 mm
1.70” - 3.69”
3 4
If you have retention springs,
use the appropriate length of
retention spring included to
secure the cooler.
Place the
cooler on
your chipset.
If you have a screw
mount, set the bracket
on the cooler. Be sure
to fi t the bracket arms
over the mounting
post screws.
Tighten thumb nuts
to mounting post
screws by hand.
The cooler should
now be secure.
Remove the protective fi lm from
the cooling block.
Install Cooler
Screw-Mounted
Retention Spring
The bracet included
is designed to fi t a
range of mounting
post spaces.
43.2 mm - 93.7 mm
1.70” - 3.69”